Products

copper extrusion press / extrusion line

Product Detailed

This series equipment is suitable for copper and copper alloy extruded pipe, rod, row, wire and other products.

Features:

1. The whole structure with four-poster horizontal, set on the tank. Has the structure of new, neat, easy to maintain.

2. Moving beam using four-point positioning, center adjustable, tool and die design and reasonable can greatly reduce the production costs.

3. Can set different extrusion process, using dynamic and fixed pin mode with extruded tubes with different pore sizes.

4. Using a large flow of hydraulic cartridge valve system, good sealing performance, low temperature rise.

5. Electrical Parts MITSUBISHI PLC products, sensitive and reliable.

Type	Working pressure of hydraulic system	Extrusion pressure	Height	Bore dimensions of extruding cylinder	Motor power	Overall dimensions
XJ-300	21MPa	3000KN	700 mm	Φ55-Φ75×350	110 kw	5.5×2.1×2.3
XJ-500	21MPa	5000 KN	895 mm	Φ75-Φ95×400	150 kw	7×2.3×2.7
XJ-630	21MPa	6300 KN	945 mm	Φ85-Φ105×400	225 kw	7.5×2.3×2.8
XJ-800	21MPa	8000 KN	1045 mm	Φ105-Φ135×550	396 kw	10×2.3×3.1 (11×2.3×3.1)
XJ-1000	21MPa	10000 KN	1095 mm	Φ125-Φ145×600	396 kw	10.5×2.4×3.3 (11.5×2.4×3.3)
XJ-1250	21MPa	12500 KN	1185 mm	Φ135-Φ165×650	528 kw	12×2.5×3.4 (13×2.5×3.4)
XJ-1630	21MPa	16300 KN	1285 mm	Φ155-Φ205×750	1000 kw	13.5×4.3×4.1 (14.5×4.3×4.1)
XJ-1800	21MPa	18000 KN	1285 mm	Φ175-Φ225×800	1000 kw	14×4.3×4.1 (15×4.3×4.1)
XJ-2000	21MPa	20000 KN	1650 mm	Φ195-Φ245×850	1075 kw	15.5×4.5×4.3 (17×4.5×4.3)
XJ-2500	21MPa	25000 KN	1700 mm	Φ225-Φ265×900	1250 kw	18×4.8×4.5 (20×4.8×4.5)
XJ-3000	21MPa	30000 KN	1860 mm	Φ255-Φ305×1000	1500 kw	20×4.8×5 (22×4.8×5)

copper extrusion press / extrusion line

Other products